Art.Nr. dpa4061bm

DPA 4061-BM
d:screet™ 4061 Omni Mic Loud SPL,schwarz, MicroDot
Abverkauf solange Vorrat reicht

Preis 249,90 EUR

inkl. gesetzl. MwSt. zzgl. Versandkosten


DPA 4061-BM
The Type 4061-B is the black version of the Miniature Microphone Type 4061. This type is a prepolarized omnidirectional Miniature Condenser Microphone with a 5.4mm vertical diaphragm specially designed for maximum performance under the often difficult conditions when mounted directly on the human body. Special attention has been taken in the design to deal with the humidity problems that often occur in theatrical applications. A double vent protection system together with water resistant materials inside the microphone make it more than difficult for moisture to cause the Miniature Microphone to fail. By changing the protection grids, the Miniature Microphones can furthermore be acoustically modified according to the placement of the microphone on the body. Type 4061 is acoustically identical with the award winning Type 4060, but the sensitivity is adjusted to 6mV/Pa to match some of the more sensitive transmitters on the market. The noise floor of the Type 4061 is 26dB(A) re. 20 µPa and if powered correctly the microphone will be able to handle sound pressure levels up to 144dB SPL before clipping occurs. A wide range of connection adapters makes it possible to use the 4061 with close to any professional wireless system available plus 48 V phantom.

Details:
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser element with vertical diaphragm
  • Frequency range: Soft boost grid: 20Hz-20kHz ±2dB, 3dB soft boost at 8-20kHz
  • High boost grid: 20Hz-20kHz ±2dB, 10dB boost at 12kHz
  • Cartridge LLF (-3dB): 20Hz
  • Directional characteristics: Omnidirectional
  • Equivalent noise level A-weighted: Typ. 26dB(A) re. 20 µPa (max. 28dB(A))
  • Sensitivity: Nominally 6 mV/Pa ± 3dB at 1kHz
  • Equiv. noise level ITU-R BS.468-4: Typ. 38dB (max. 40dB)
  • Total harmonic distortion (THD): 133dB SPL peak (<1% THD)
  • Preamplifier output impedance: 30-40 Ohm
  • Preamplifier cable drive capability: Up to 300m (984ft)
  • Microphone length: 12.7mm (0.5in)
  • Microphone diameter: 5.4mm (0.21in)
  • Maximum sound pressure level: 144dB SPL before clipping
  • Weight: <7.5g (0.26oz) incl. cable and MicroDot connector



© 2003-2021 HL Audio Vertrieb GmbH