Art.Nr. dpa4066f

DPA 4066-F
Nackenbügel-Mic verstellbar, beige
Abverkauf solange Vorrat reicht

Preis 404,60 EUR

inkl. gesetzl. MwSt. zzgl. Versandkosten


DPA 4066-F

The 4066 is a flexible miniature microphone solution, that features very easy and fast adjustment possibilities. The headband construction is unique in design, because it gives the user the choice between left and/or right mounting and colour change. It is also possible to use the MMB4066 Miniature Microphone Boom separately, in applications where the headband is not needed.

The 4066 offers a clean and transparent sound quality with lots of headroom.

Attention has been paid to the humidity problems that often occur in theatrical applications A double vent protection system, a drop stopper on the microphone boom, together with water resistant materials inside the microphone, makes it more than difficult for the humidity to cause the headband Microphone to fail. The headband surface is matgold plated and headband earhooks are covered with a silicon hose.

The sensitivity is 6mV/Pa to match the level of the human voice to the general input sensitivity of most wireless transmitters. If powered correctly the microphone will be able to handle sound pressure levels up to 144dB SPL before clipping occurs.

A wide range of connection adapters makes it possible to use the 4066 with most of the professional wireless systems available plus 48 V phantom XLR connection.

  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser element with vertical diaphragm
  • Frequency range: Soft boost grid: 20Hz-20kHz ±2dB, 3dB soft boost at 8-20kHz
  • High boost grid: 20Hz-20kHz ±2dB, 10dB boost at 12kHz
  • Cartridge LLF (-3dB): 20Hz
  • Directional characteristics: Omidirectional
  • Equivalent noise level A-weighted: Typ. 26dB(A) re. 20 µPa (max. 28dB(A))
  • Sensitivity: Nominally 6 mV/Pa ± 3dB at 1kHz
  • Equiv. noise level ITU-R BS.468-4: Typ. 38dB (max. 40dB)
  • Total harmonic distortion (THD): 123dB SPL peak (<1% THD)
  • Preamplifier output impedance: 30-40 Ohm
  • Preamplifier cable drive capability: Up to 300m (984ft)
  • Microphone length: 12.7mm (0.5in)
  • Microphone diameter: 5.4mm (0.21in)
  • Maximum sound pressure level: 144dB SPL peak before clipping
  • Weight: 14g (0.5oz) incl. cable and MicroDot connector



© 2003-2021 HL Audio Vertrieb GmbH